Commercial

Warehouse and workshop fit-out

The building came with base-build electrical only, so there were plenty of points to add for the new occupant. Working from elevated work platforms we added multiple three phase outlets, additional distribution boards, bollards and cable tray. A second stage wired up LED battens, emergency lighting and power points to the freshly built mezzanine.

Smithfield

On site

Commercial work

The warehouse during the fit-out, with the scissor lift up and the first battens in

Orange conduit running into perforated cable tray along the precast wall

The new distribution board at the base of the wall, with the run carried up to the roof

A power outlet fed by a surface conduit drop on a precast panel

Conduit and outlets run along the mezzanine wall

The mezzanine from the floor, with the conduit run and outlets in place

During: LED battens installed the length of the roof while the fit-out continues below

After: the same room with the benches in, the walls painted and the new lighting on

The completed workshop space under the LED batten lighting

More work

Other projects

Request a quote

The finished pole and meter box, with the trench backfilled and the ground made good

Grose Vale · Level 2 ASP

Underground supply and private pole

A new private pole, and over 350 metres of trench to the rear of the block.

6 photos

The completed bathroom, looking through to the shower

Kurmond · Residential

Bathroom renovation with underfloor heating

Underfloor heating and three stages of lighting in a full renovation.

5 photos

After: the same board rebuilt, with new metering and a labelled row of circuit breakers

Residential

Switchboard upgrades

Old fuse boards replaced with new metering and labelled circuit protection.

4 photos

Need it sorted today?

Request a quote